MOTOR

Tekin's brushed Rock Crawler Motors are ready for rock-pounding punishment. Brushed motors are still the choice of top level rock crawling competitors and the Tekin T-Series was designed for use by the most demanding drivers. Choose from the handwound and pro-tuned Pro models or the Standard models for competition level performance. Radio Control Rock Crawlers crave maximum torque, smooth throttle response and strong holding power - Tekin's T-Series is up to the task.

Tekin T-Series motors are available separately or as complete systems with the FX-R ESC.

Brushed Motor Design
Dual precision Ball Bearings
Hand Wound Armature (Pro model)
High Torque Specification
Completely Rebuildable
Legal in Rock Crawling Competitions
Your choice of 35 turn, 45 turn and 55 turn, standard or hand wound

ESC

The FX series leads the industry in brushed competition performance. With it's ultra small footprint and flash-programmable microcontrollers with the lowest on-resistance MOSFETS ever used in a speed controller, the FX completely eliminates any power bottleneck between your battery and motor, increasing efficiency and breathing new life into your brushed motors. The FX has thousands of possible settings right on-board with Tekin's QuickTune™ Programming and is also capable of extensive tuning and updates when used with Tekin's HOTWIRE PC Interface (sold separately).

The FX-R reversing speed controller leads the industry in pure rock crawling performance. With its tiny footprint, improved drag brake resolution with lock-down holding power, adjustable reverse type with reverse delay, no reverse or instant reverse, ultra smooth low speed creep and precision throttle and braking response, the FX-R easily gives you the edge over the competition. The FX-R has thousands of possible settings right on-board with Tekin's QuickTune™ Programming and is capable of extensive tuning and updating when used with Tekin's HotWire PC Interface*. The FX-R can also take on your power needs with 3S Li-Po compatibility when used with 35 turn or higher motors. Install the FX-R and step up to smarter, smaller, faster electronics. And if you have an older FX-R you can download the latest software updates with our HOTWIRE interface.

FEATURES

Easily Access Programming, Anywhere, Anytime
On-Board Temperature Indicator
PC Interface for Custom Programming *Tekin HOTWIRE Required
HDAC: High Density Copper Fet Boards
Solder Posts for Easy Wire Replacement
Self Test Diagnostics and Factory Reset
Pit Tune Mode
Digital Glitch Filtering
QuickTune™ One-Touch Programming
One-Touch Radio Calibration
Rock Crawler Safe with 3S Lipo and 35T+ motors


PROGRAM FEATURES

Drag Brake (11 steps)
Neutral Width (11 Steps)
Current Limiter (none, 10 steps)
Push Control- Anti Drag (11 steps)
FX, FXPro: Throttle Profiles (6 choices)
FX, FXPro: Brake Profiles (6 choices)
FX-R, FX-R Pro: Reverse Type (3 choices; none, delay, immediate)
FX-R, FX-R Pro: Reverse Strength (11 steps)
Voltage Cutoffs (none, 2S, 3S, Custom)
Additional Tuning via Tekin HOTWIRE PC Interface (sold separately)

SPECS

Controls: Forward/Brake/Reverse
ON Resistance: 0.0012 Ohms
Input Voltage: 4-9 Cells, 2S Lipo (3S Lipo with 35T or higher motor)
BEC: 6.0V/3.0A
Motor Limit: 13 Turn
Throttle Profiles: 7 choices on board
Reverse Type : 3 choices on board; none, delay, immediate
Reverse Strength: 11 steps on board
Rock Crawler Spec: 3S Lipo compatible when used with 35T or higher motor
Dimensions: 1.1 x 0.80 x 0.40 " (28 x 20 x 10mm)